You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
329 lines
11 KiB
329 lines
11 KiB
/* |
|
* Copyright (c) 2001-2003 Swedish Institute of Computer Science. |
|
* All rights reserved. |
|
* |
|
* Redistribution and use in source and binary forms, with or without modification, |
|
* are permitted provided that the following conditions are met: |
|
* |
|
* 1. Redistributions of source code must retain the above copyright notice, |
|
* this list of conditions and the following disclaimer. |
|
* 2. Redistributions in binary form must reproduce the above copyright notice, |
|
* this list of conditions and the following disclaimer in the documentation |
|
* and/or other materials provided with the distribution. |
|
* 3. The name of the author may not be used to endorse or promote products |
|
* derived from this software without specific prior written permission. |
|
* |
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED |
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT |
|
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT |
|
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY |
|
* OF SUCH DAMAGE. |
|
* |
|
* This file is part of the lwIP TCP/IP stack. |
|
* |
|
* Author: Adam Dunkels <adam@sics.se> |
|
* |
|
*/ |
|
#ifndef LWIP_LWIPOPTS_H |
|
#define LWIP_LWIPOPTS_H |
|
|
|
#ifdef LWIP_OPTTEST_FILE |
|
#include "lwipopts_test.h" |
|
#else /* LWIP_OPTTEST_FILE */ |
|
|
|
#define LWIP_IPV4 1 |
|
#define LWIP_IPV6 1 |
|
|
|
#define NO_SYS 0 |
|
#define LWIP_SOCKET (NO_SYS==0) |
|
#define LWIP_NETCONN (NO_SYS==0) |
|
#define LWIP_NETIF_API (NO_SYS==0) |
|
|
|
#define LWIP_IGMP LWIP_IPV4 |
|
#define LWIP_ICMP LWIP_IPV4 |
|
|
|
#define LWIP_SNMP LWIP_UDP |
|
#define MIB2_STATS LWIP_SNMP |
|
#ifdef LWIP_HAVE_MBEDTLS |
|
#define LWIP_SNMP_V3 (LWIP_SNMP) |
|
#endif |
|
|
|
#define LWIP_DNS LWIP_UDP |
|
#define LWIP_MDNS_RESPONDER LWIP_UDP |
|
|
|
#define LWIP_NUM_NETIF_CLIENT_DATA (LWIP_MDNS_RESPONDER) |
|
|
|
#define LWIP_HAVE_LOOPIF 1 |
|
#define LWIP_NETIF_LOOPBACK 1 |
|
#define LWIP_LOOPBACK_MAX_PBUFS 10 |
|
|
|
#define TCP_LISTEN_BACKLOG 1 |
|
|
|
#define LWIP_COMPAT_SOCKETS 1 |
|
#define LWIP_SO_RCVTIMEO 1 |
|
#define LWIP_SO_RCVBUF 1 |
|
|
|
#define LWIP_TCPIP_CORE_LOCKING 1 |
|
|
|
#define LWIP_NETIF_LINK_CALLBACK 1 |
|
#define LWIP_NETIF_STATUS_CALLBACK 1 |
|
#define LWIP_NETIF_EXT_STATUS_CALLBACK 1 |
|
|
|
#ifdef LWIP_DEBUG |
|
|
|
#define LWIP_DBG_MIN_LEVEL 0 |
|
#define PPP_DEBUG LWIP_DBG_OFF |
|
#define MEM_DEBUG LWIP_DBG_OFF |
|
#define MEMP_DEBUG LWIP_DBG_OFF |
|
#define PBUF_DEBUG LWIP_DBG_OFF |
|
#define API_LIB_DEBUG LWIP_DBG_OFF |
|
#define API_MSG_DEBUG LWIP_DBG_OFF |
|
#define TCPIP_DEBUG LWIP_DBG_OFF |
|
#define NETIF_DEBUG LWIP_DBG_OFF |
|
#define SOCKETS_DEBUG LWIP_DBG_OFF |
|
#define DNS_DEBUG LWIP_DBG_OFF |
|
#define AUTOIP_DEBUG LWIP_DBG_OFF |
|
#define DHCP_DEBUG LWIP_DBG_OFF |
|
#define IP_DEBUG LWIP_DBG_OFF |
|
#define IP_REASS_DEBUG LWIP_DBG_OFF |
|
#define ICMP_DEBUG LWIP_DBG_OFF |
|
#define IGMP_DEBUG LWIP_DBG_OFF |
|
#define UDP_DEBUG LWIP_DBG_OFF |
|
#define TCP_DEBUG LWIP_DBG_OFF |
|
#define TCP_INPUT_DEBUG LWIP_DBG_OFF |
|
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF |
|
#define TCP_RTO_DEBUG LWIP_DBG_OFF |
|
#define TCP_CWND_DEBUG LWIP_DBG_OFF |
|
#define TCP_WND_DEBUG LWIP_DBG_OFF |
|
#define TCP_FR_DEBUG LWIP_DBG_OFF |
|
#define TCP_QLEN_DEBUG LWIP_DBG_OFF |
|
#define TCP_RST_DEBUG LWIP_DBG_OFF |
|
#endif |
|
|
|
#define LWIP_DBG_TYPES_ON (LWIP_DBG_ON|LWIP_DBG_TRACE|LWIP_DBG_STATE|LWIP_DBG_FRESH|LWIP_DBG_HALT) |
|
|
|
|
|
/* ---------- Memory options ---------- */ |
|
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which |
|
lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 |
|
byte alignment -> define MEM_ALIGNMENT to 2. */ |
|
/* MSVC port: intel processors don't need 4-byte alignment, |
|
but are faster that way! */ |
|
#define MEM_ALIGNMENT 4U |
|
|
|
/* MEM_SIZE: the size of the heap memory. If the application will send |
|
a lot of data that needs to be copied, this should be set high. */ |
|
#define MEM_SIZE 10240 |
|
|
|
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application |
|
sends a lot of data out of ROM (or other static memory), this |
|
should be set high. */ |
|
#define MEMP_NUM_PBUF 16 |
|
/* MEMP_NUM_RAW_PCB: the number of UDP protocol control blocks. One |
|
per active RAW "connection". */ |
|
#define MEMP_NUM_RAW_PCB 3 |
|
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One |
|
per active UDP "connection". */ |
|
#define MEMP_NUM_UDP_PCB 4 |
|
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP |
|
connections. */ |
|
#define MEMP_NUM_TCP_PCB 5 |
|
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP |
|
connections. */ |
|
#define MEMP_NUM_TCP_PCB_LISTEN 8 |
|
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP |
|
segments. */ |
|
#define MEMP_NUM_TCP_SEG 16 |
|
/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active |
|
timeouts. */ |
|
#define MEMP_NUM_SYS_TIMEOUT 17 |
|
|
|
/* The following four are used only with the sequential API and can be |
|
set to 0 if the application only will use the raw API. */ |
|
/* MEMP_NUM_NETBUF: the number of struct netbufs. */ |
|
#define MEMP_NUM_NETBUF 2 |
|
/* MEMP_NUM_NETCONN: the number of struct netconns. */ |
|
#define MEMP_NUM_NETCONN 10 |
|
/* MEMP_NUM_TCPIP_MSG_*: the number of struct tcpip_msg, which is used |
|
for sequential API communication and incoming packets. Used in |
|
src/api/tcpip.c. */ |
|
#define MEMP_NUM_TCPIP_MSG_API 16 |
|
#define MEMP_NUM_TCPIP_MSG_INPKT 16 |
|
|
|
|
|
/* ---------- Pbuf options ---------- */ |
|
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ |
|
#define PBUF_POOL_SIZE 120 |
|
|
|
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ |
|
#define PBUF_POOL_BUFSIZE 256 |
|
|
|
/** SYS_LIGHTWEIGHT_PROT |
|
* define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection |
|
* for certain critical regions during buffer allocation, deallocation and memory |
|
* allocation and deallocation. |
|
*/ |
|
#define SYS_LIGHTWEIGHT_PROT (NO_SYS==0) |
|
|
|
|
|
/* ---------- TCP options ---------- */ |
|
#define LWIP_TCP 1 |
|
#define TCP_TTL 255 |
|
|
|
#define LWIP_ALTCP (LWIP_TCP) |
|
#ifdef LWIP_HAVE_MBEDTLS |
|
#define LWIP_ALTCP_TLS (LWIP_TCP) |
|
#define LWIP_ALTCP_TLS_MBEDTLS (LWIP_TCP) |
|
#endif |
|
|
|
|
|
/* Controls if TCP should queue segments that arrive out of |
|
order. Define to 0 if your device is low on memory. */ |
|
#define TCP_QUEUE_OOSEQ 1 |
|
|
|
/* TCP Maximum segment size. */ |
|
#define TCP_MSS 1024 |
|
|
|
/* TCP sender buffer space (bytes). */ |
|
#define TCP_SND_BUF 2048 |
|
|
|
/* TCP sender buffer space (pbufs). This must be at least = 2 * |
|
TCP_SND_BUF/TCP_MSS for things to work. */ |
|
#define TCP_SND_QUEUELEN (4 * TCP_SND_BUF/TCP_MSS) |
|
|
|
/* TCP writable space (bytes). This must be less than or equal |
|
to TCP_SND_BUF. It is the amount of space which must be |
|
available in the tcp snd_buf for select to return writable */ |
|
#define TCP_SNDLOWAT (TCP_SND_BUF/2) |
|
|
|
/* TCP receive window. */ |
|
#define TCP_WND (20 * 1024) |
|
|
|
/* Maximum number of retransmissions of data segments. */ |
|
#define TCP_MAXRTX 12 |
|
|
|
/* Maximum number of retransmissions of SYN segments. */ |
|
#define TCP_SYNMAXRTX 4 |
|
|
|
|
|
/* ---------- ARP options ---------- */ |
|
#define LWIP_ARP 1 |
|
#define ARP_TABLE_SIZE 10 |
|
#define ARP_QUEUEING 1 |
|
|
|
|
|
/* ---------- IP options ---------- */ |
|
/* Define IP_FORWARD to 1 if you wish to have the ability to forward |
|
IP packets across network interfaces. If you are going to run lwIP |
|
on a device with only one network interface, define this to 0. */ |
|
#define IP_FORWARD 1 |
|
|
|
/* IP reassembly and segmentation.These are orthogonal even |
|
* if they both deal with IP fragments */ |
|
#define IP_REASSEMBLY 1 |
|
#define IP_REASS_MAX_PBUFS (10 * ((1500 + PBUF_POOL_BUFSIZE - 1) / PBUF_POOL_BUFSIZE)) |
|
#define MEMP_NUM_REASSDATA IP_REASS_MAX_PBUFS |
|
#define IP_FRAG 1 |
|
#define IPV6_FRAG_COPYHEADER 1 |
|
|
|
/* ---------- ICMP options ---------- */ |
|
#define ICMP_TTL 255 |
|
|
|
|
|
/* ---------- DHCP options ---------- */ |
|
/* Define LWIP_DHCP to 1 if you want DHCP configuration of |
|
interfaces. */ |
|
#define LWIP_DHCP LWIP_UDP |
|
|
|
/* 1 if you want to do an ARP check on the offered address |
|
(recommended). */ |
|
#define DHCP_DOES_ARP_CHECK (LWIP_DHCP) |
|
|
|
|
|
/* ---------- AUTOIP options ------- */ |
|
#define LWIP_AUTOIP (LWIP_DHCP) |
|
#define LWIP_DHCP_AUTOIP_COOP (LWIP_DHCP && LWIP_AUTOIP) |
|
|
|
|
|
/* ---------- UDP options ---------- */ |
|
#define LWIP_UDP 1 |
|
#define LWIP_UDPLITE LWIP_UDP |
|
#define UDP_TTL 255 |
|
|
|
|
|
/* ---------- RAW options ---------- */ |
|
#define LWIP_RAW 1 |
|
|
|
|
|
/* ---------- Statistics options ---------- */ |
|
|
|
#define LWIP_STATS 1 |
|
#define LWIP_STATS_DISPLAY 1 |
|
|
|
#if LWIP_STATS |
|
#define LINK_STATS 1 |
|
#define IP_STATS 1 |
|
#define ICMP_STATS 1 |
|
#define IGMP_STATS 1 |
|
#define IPFRAG_STATS 1 |
|
#define UDP_STATS 1 |
|
#define TCP_STATS 1 |
|
#define MEM_STATS 1 |
|
#define MEMP_STATS 1 |
|
#define PBUF_STATS 1 |
|
#define SYS_STATS 1 |
|
#endif /* LWIP_STATS */ |
|
|
|
/* ---------- NETBIOS options ---------- */ |
|
#define LWIP_NETBIOS_RESPOND_NAME_QUERY 1 |
|
|
|
/* ---------- PPP options ---------- */ |
|
|
|
#define PPP_SUPPORT 1 /* Set > 0 for PPP */ |
|
|
|
#if PPP_SUPPORT |
|
|
|
#define NUM_PPP 1 /* Max PPP sessions. */ |
|
|
|
|
|
/* Select modules to enable. Ideally these would be set in the makefile but |
|
* we're limited by the command line length so you need to modify the settings |
|
* in this file. |
|
*/ |
|
#define PPPOE_SUPPORT 1 |
|
#define PPPOS_SUPPORT 1 |
|
|
|
#define PAP_SUPPORT 1 /* Set > 0 for PAP. */ |
|
#define CHAP_SUPPORT 1 /* Set > 0 for CHAP. */ |
|
#define MSCHAP_SUPPORT 0 /* Set > 0 for MSCHAP */ |
|
#define CBCP_SUPPORT 0 /* Set > 0 for CBCP (NOT FUNCTIONAL!) */ |
|
#define CCP_SUPPORT 0 /* Set > 0 for CCP */ |
|
#define VJ_SUPPORT 1 /* Set > 0 for VJ header compression. */ |
|
#define MD5_SUPPORT 1 /* Set > 0 for MD5 (see also CHAP) */ |
|
|
|
#endif /* PPP_SUPPORT */ |
|
|
|
#endif /* LWIP_OPTTEST_FILE */ |
|
|
|
/* The following defines must be done even in OPTTEST mode: */ |
|
|
|
#if !defined(NO_SYS) || !NO_SYS /* default is 0 */ |
|
void sys_check_core_locking(void); |
|
#define LWIP_ASSERT_CORE_LOCKED() sys_check_core_locking() |
|
void sys_mark_tcpip_thread(void); |
|
#define LWIP_MARK_TCPIP_THREAD() sys_mark_tcpip_thread() |
|
|
|
#if !defined(LWIP_TCPIP_CORE_LOCKING) || LWIP_TCPIP_CORE_LOCKING /* default is 1 */ |
|
void sys_lock_tcpip_core(void); |
|
#define LOCK_TCPIP_CORE() sys_lock_tcpip_core() |
|
void sys_unlock_tcpip_core(void); |
|
#define UNLOCK_TCPIP_CORE() sys_unlock_tcpip_core() |
|
#endif |
|
#endif |
|
|
|
#endif /* LWIP_LWIPOPTS_H */
|
|
|